Free Shipping in Canada on Orders Over $149

Why should I use Stain and Scale in my hot tub?

FRESH FILL use Stain and Scale 1

Why:

-Prevents stains and scale at fresh fill

-Tap water is often unbalanced

-Contains metals and rust deposits

-Risk is during the initial heating, balancing, shocking and sanitizing of the water

-Also, while filling, scale can be removed

-All natural formulation – Inspired by Nature

-Phosphate-free  

-Stable in presence of sanitizers, oxidizers

o Consistent performance

o Doesn’t waste other products

 

When:

-Use every time the tub is freshly filled

-In tubs that have experienced scaling or staining, allow the product time to work in cold water by leaving the heater off or not starting the pump immediately after filling The Dazzle 2 Step Stain & Scale prevention program:

-Stain & Scale 1 on fresh fill (heavy lifter)

-Stain & Scale 2 weekly thereafter for continuous protection (the toner) The best stain & scale method available

 

How Much:

-Apply 375 ml per 1,000 Litres

-1 Capful = 25 mls.

 

How:

-Apply directly to cold water as the tub fills

-As soon as there is water in the footwell, the product can be added

-It is preferable that the pump and filter not be running to allow the product maximum time to work in cold water

-If the tub is already full, apply as soon as possible after full

 

WEEKLY use Stain and Scale 2

Why:

-Ongoing protection against risk of staining and scale formation

-Risk is due to;

o pH, TA, CH, TDS movement

o effects of product additions

o top-up water o natural erosion

-Removes light metal stains and scale

-All-natural formulation – non-toxic, biodegradable

-Phosphate-free

-Will not breakdown prematurely;

o Stable in presence of sanitizers, oxidizers

o Allows other products to be added at same time in convenient program

 

When:

-Use weekly as part of regular maintenance program

-Anytime pH rises above 7.8

o Essential above 8.2

-Anytime scale or stains are noticed

-Use liberally;

o Will not consume sanitizers

o Will not break down from sanitizers

o All natural – no chemical footprint The Dazzle 2 Step Stain & Scale prevention program:

-Stain & Scale 1 on fresh fill (heavy lifter)

-Stain & Scale 2 weekly thereafter for continuous protection (the toner) The best stain & scale method available

 

How Much:

-Apply 1 capful per 1,000 Litres weekly

-1 Capful = 25 mls.

-Increase dosage in extreme situations

o Up to 3 capfuls per 1,000 L.

 

How:

-Operate pump with air off

-Apply directly to water

-Circulate for minimum 15 minutes 

 

Kath

 Thanks as always to Dazzle for their excellent water care information.

Leave a comment

Name .
.
Message .

Please note, comments must be approved before they are published